BRDRY - VY-KOTE 443 GREEN BASE, 443B0505
- MSDS: BRDRY
- Manufacturer: DEVOE COATINGS CO
- Product Name: VY-KOTE 443 GREEN BASE, 443B0505
- National Stock Number: 8010-00N037075
Product Identification
Product ID:VY-KOTE 443 GREEN BASE, 443B0505
MSDS Date:10/19/1990
FSC:8010
NIIN:00N037075
Kit Part:Y
MSDS Number: BRDRY
Responsible Party
LOUISVILLE, KY 40207
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 502-897-9861
Cage: 1HK86
Contractor
Telephone: 502-897-9861
Cage: 1HK86
Ingredients
NAVAL REGS REQ SUBSTITUTION OF LESS HAZ MATLS. FOR
RTECS: 9999999ZZ
REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY &
RTECS: 9999999ZZ
NIOSH/MSHA APPRVD CHEM/MECH FILTER DESIGNED TO
RTECS: 9999999ZZ
CONFINED AREAS, WEAR NIOSH/MSHA APPRVD AIR SUPPLY
RTECS: 9999999ZZ
CUTTING, WELDING, BRAZING & SANDING MATERIAL COATED
RTECS: 9999999ZZ
STDS IN MIXING, APPLICATION & CURING AREAS & TO REMOVE
RTECS: 9999999ZZ
DURING WELDING & FLAME CUTTING ON SURFS COATED
RTECS: 9999999ZZ
REMOVING HEAVY SOLVENT VAPORS FROM LOWER LEVELS OF
RTECS: 9999999ZZ
33.
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 60%
OSHA PEL 400 PPM;500 PPM STEL
ACGIH TLV: 400 PPM;500 PPM STEL
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: <5%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
4.2.
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 20%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
POLYVINYL BUTYRAL RESIN
CAS: 27360-07-2
Fraction By Weight: 10%
17.5.
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: <5%
711.53 G/L.
RTECS: 9999999VO
Fraction By Weight: SEE ING
IGNITE. DURING EMER CNDTNS OVEREXP TO DECOMP PRODS
RTECS: 9999999ZZ
OBTAIN MED ATTN.
RTECS: 9999999ZZ
COMPOUNDS, CHLORINE OR HCL.
RTECS: 9999999ZZ
NON-SPARKING TOOLS. STORE IN CLOSED CONTAINER
RTECS: 9999999ZZ
BUILD-UP OF VAPS BY MAINTAINING CONTINUOUS FLOW
RTECS: 9999999ZZ
FLAME. STORE LG QTYS IN BLDGS TO COMPLY W/OSHA
RTECS: 9999999ZZ
CONTENTS TO BOTTLES/OTHER UNLABELLED CNTNRS. DO NOT
RTECS: 9999999ZZ
PROD, THEN MIXT OF BASE & CONVERTER PORTIONS WILL
RTECS: 9999999ZZ
FOOD PRODS. DO NOT USE ON TOYS, FURNITURE/SURFS OF
RTECS: 9999999ZZ
CONSULT OSHA LEAD STD 29 CFR 1910.1025 FOR ADDNL
RTECS: 9999999ZZ
CHROMIC ACID, ZINC SALT; (BASIC ZINC CHROMATE)
CAS: 13530-65-9
RTECS: GB3290000
Fraction By Weight: 10%
OSHA PEL 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.01 MG/M3 (CR)
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:IRRIT OF RESP TRACT; HDCH,
NAUS, DIZZ, WEAK & FATG. EXTREME EXPOS CAN RSLT IN UNCON & EVEN
RESP ARREST. SKIN:CONT CAUSES IRRIT. MAY BE HARMFUL IF ABSORBED
THRU SKIN. EYE:CONT CAUSES IRRIT. INGEST:CAN CAUSE STOM &/OR
INTESTINAL IRRIT, NAUS, VOMIT & DIARR. CHRONIC:REPORTS HAVE ASSOC
RPTD & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:ZINC CHROMATE: GROUP 1, IARC VOL 7,
P.165, 1987; KNOWN CARCINOGEN, NTP 6TH ANNUAL REPORT ON
CARCINOGENS, 1991.
Effects of Overexposure:HEALTH HAZARDS: PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN & NERVOUS SYSTM DAMAGE.
PROLONGED/REPEATED BREATHING OF SPRAY MIST &/OR SANDING DUST OVER
PERIOD OF YEARS MAY CAUSE DU ST DISEASE OF LUNGS. NOTICE:INTENT
MISUSE BY DELIBERATELY CONCENTRATING & INHALING CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE, WHEN USED I/A/W SAFE HANDLING
& USE INFORMATION.
First Aid
First Aid:INHAL:IF YOU EXPER DFCLTY IN BRTHG, LEAVE AREA TO OBTAIN
FRESH AIR. IF CONTINUED DFCLTY IS EXPER, SUMMON MED ASSIST IMMED.
IF BRTHG CEASES, RESTORE USING APPRVD CPR TECHNIQUES & SUMMON MED
HELP IMMED. EYES:FLUSH IMMED W/LG AMTS OF WATER FOR @ LST 15 MINS.
GET MED ASSIST. SKIN:WASH AFFECTED AREAS W/SOAP & WATER. REMOVE
SOILED CLTHG. GET MED ASSIST IF IRRIT PERSISTS. INGEST:CONSULT MD
IMMED.
Fire Fighting
Flash Point Method:SCC
Flash Point:60.0F,15.6C
Lower Limits:1.4%
Extinguishing Media:IN CASE OF FIRE USE CO*2 OR DRY CHEMICAL OR OTHER
NFPA APPROVED METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SUMMON PROF FIREFIGHTERS. WATER SPRAY MAY BE INEFT. IF WATER IS
USED, FOG NOZZS PREF. IF EXPOSED (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & FLAME. VAPS MAY CAUSE FLASH FIRE. VAPS MAY
IGNITE EXPLOSIVELY. VAPS MAY SPREAD LONG (SUPDAT)
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT SURFS
& ELEC, STATIC/FRICTIONAL SPKS). PVNT BRTHG OF VAPS. VENT AREA.
BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUT INFO IN OTHER
SECTIONS OF THIS MSDS. CONTAI N SPILLED MATL & REMOVE W/INERT
ABSORB & (ING 11)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT BREATHE VAPS/SPRAY MIST/SANDING
DUST. DO NOT GET IN EYES/ON SKIN. KEEP AWAY FROM HEAT, SPKS &
FLAMES. DO NOT SMOKE. OBSERVE ALL APPLIC PRECS.
Other Precautions:EXTING ALL PILOT LIGHTS & TURN OFF ALL SOURCES OF
IGNIT INCL HEATERS, FANS & OTHER NON-EXPLO-PROOF ELEC EQUIP, DURING
USE & UNTIL ALL VAPS ARE GONE. VAPS MAY IGNITE EXPLOSIVELY & MAY
SPREAD LONG DISTS & BEYOND CLSD DOORS. PREVENT (ING 12)
Exposure Controls
Respiratory Protection:WORK PROCESS MIN RESP PROT IS NIOSH/MSHA APPRVD
FULL-FACE AIR PURIFYING RESP W/COMBINATION HEPA/ORG CARTRIDGES.
WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS & DURING SANDING/GRINDING
OPERATIONS, USE NIOSH /MSHA APPRVD MECH FILTER RESP TO(ING 19)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 23)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING & BOOTS TO
PREVENT SKIN CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:TO FIRE/EXTREME HEAT, WATER SHLD BE USED TO COOL CLSD
CNTNRS & PVNT PRESS BUILD UP/POSS AUTO-IGNIT. EXPLO HAZ:DISTS &
BEYOND CLSD DOORS. DUE TO PRESS BUILD-UP, CLSD CNTNRS EXPOSED TO E
XTREME HEAT MAY EXPLODE. NEVER USE WELDING/CUTTING TORCH ON/NEAR
CNTNR (EVEN EMPTY) AS PROD/ITS RESIDUE MAY (ING 8)
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>180F,>82C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:89.96
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOX FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE, ZINC &
CHROMATE (ING 10)
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.